NetComm Industrial 4G WiFi M2M Router NTC-140W-02

  • $895.00

  • Ex Tax: $895.00
  • Availability:In Stock
  • Product Code:


DigilifeOnline

Netcomm Industrial 4G WiFi M2M Router

NTC-140W-02

latest Firmware v2.0.20.4

If you want to pick up, please arrange the schedule with me before you purchase

Brand New with TAX INVOICE

ALL PRODUCTS COME WITH THE AUSTRALIA WIDE WARRANTY
ALL SHIP FROM SYDNEY WAREHOUSE


Product description:

4G WiFi M2M Router

The NetComm Wireless 4G WiFi M2M Router utilises the speed and performance capabilities of a LTE/4G network to deliver seamless M2M connectivity for a broad range of M2M applications. The NTC-140W features two Gigabit Ethernet ports and high speed WiFi connectivity making it an ideal device for high speed networking. The device also features vehicle voltage support, GPS and Ignition input making it ideal for mobile assets and transportation applications.
The NTC-140W creates point-to-point and point-to-multi-point communication enabling the secure collection and analysis of data from remote and unmanned applications.
The NTC-140W’s powerful processor delivers optimal performance and its embedded NetComm Linux OS and Software Development Kit (SDK) offers the end user the capability to install custom firmware to the on-board flash memory via the programming interface. Built in VPN clients also ensure a secure connection over a public mobile network.
NTC-140W overview 1
NTC-140W overview 2

High Bandwidth 4G

With an embedded 4G modem providing high speed cellular connectivity, this device is perfect for applications that require higher bandwidth and faster throughput speeds. With global connectivity, this device is ideal for applications where large volumes of data and media is being sent and received and where real time content is being accessed.

Complete connectivity

A complete range of networking and connectivity options are available with this router. Two Gigabit Ethernet ports (LAN + WAN/LAN) provide a high speed wired connection, the built-in WiFi access point can connect wireless clients and the multi-purpose I/O port can be used to attach sensors and other peripherals to the network. In addition, the integrated GPS receiver enables users to perform location based tracking and monitoring.
NTC-140W overview 3
NTC-140W overview 4

Ignite your devices

The NTC-140W can be configured and setup to start and shutdown at the same time as an ignition for vehicular applications. It has also passed vibration and shock test to ensure it is suitable for vehicular applications





Industrial features

As you would expect, this router comes with a host of industrial features that enable advanced usage over a long period of time. Features such as an open Linux OS with a software development kit (SDK), VPN support and TR-069 for remote management and monitoring give the user complete power over the device. A configurable power save mode and a polycarbonate housing with multiple mounting options ensure this device can be used in all industrial applications.

Technical Specifications

PROCESSOR & STORAGE

  • Powerful 720Mhz ARM8 processor with 128MByte DDR2 RAM
  • 256MByte Flash memory storage (~120MB available on board space for user storage)
  • microSD card slot for expandable storage    

OPERATING SYSTEM

  • Embedded Linux & Software Development Kit (SDK)

PEAK DATA SPEED

LTE data rates: Category 3
  • Downlink:100 Mbps (20 MHz bandwidth); 50 Mbps (10 MHz bandwidth)
  • Uplink:50 Mbps (20 MHz bandwidth); 25 Mbps (10 MHz bandwidth)
UMTS (WCDMA)/HSDPA/HSUPA/HSPA+/DC-HSPA+/HSPA+ rates
  • Downlink: Up to 42 Mbps (category 24)
  • Uplink: Up to 5.76 Mbps (category 6) GSM/GPRS/EDGE
  • EDGE throughput up to 236 kbps
CDMA IS-856 (NTC-140W-01 only)
  • Up to 3.1Mbps forward channel
  • Up to 1.8Mbps reverse channel

CELLULAR BANDS

LTE (NTC-140W-01)
  • Band 2 (1900MHz)
  • Band 4 (AWS) (1700 / 2100MHz)
  • Band 5 (850MHz)
  • Band 13 (700MHz)
  • Band 17 (700MHz)
  • Band 25 (1900MHz G Block)
LTE (NTC-140W-02)
  • Band 1 (2100 MHz)
  • Band 3 (1800 MHz)
  • Band 7 (2600 MHz)
  • Band 8 (900 MHz)
  • Band 20 (800 MHz)
CDMA (EVDO Release 0 and EVDO Release A) (NTC-140W-01)
  • BC0 (Cellular 800MHz)
  • BC1 (PCS 1900MHz)
  • BC10 (Secondary 800MHz)
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ (NTC-140W-01)
  • Band 1 (2100 MHz)
  • Band 2 (1900 MHz)
  • Band 4 (AWS 1700/2100MHz)
  • Band 5 (850 MHz)
  • Band 8 (900 MHz)
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ (NTC-140W-02)
  • Band 1 (2100 MHz)
  • Band 2 (1900 MHz)
  • Band 5 (850 MHz)
  • Band 6 (800 MHz)
  • Band 8 (900 MHz)
GSM/GPRS/EDGE
  • GSM 850 (850 MHz)
  • EGSM 900 (900 MHz)
  • DCS 1800 (1800 MHz)
  • PCS 1900 (1900 MHz)
GNSS
  • GPS: 1575.42 MHz
  • EGSM

CONNECTIVITY

  • 2 x 10/100/1000 Base-T Ethernet RJ45 ports with Auto MDIX
  • Micro USB 2.0 OTG interface with 0.5A supply capability
  • 1 x multipurpose I/O pin  

SIM CARD READER

  • Lockable Tray Reader with Push-Button-to-Release
  • Supports Mini USIM/SIM Format (2FF)  

RESET BUTTON

  • Reset button (recessed, requiring pen/paperclip) with three functions: Reboot, reboot into recovery mode, and reset unit to factory defaults 

ANTENNA CONNECTORS

  • 2x SMA connectors for 3G/4G (1x Main and 1x RX Diversity)
  • 2x Reverse SMA connectors for Wireless LAN (MIMO)
  • 1x SMA connector for GPS 

LED INDICATORS

  • Tri-colour (Red/Amber/Green) LEDs. Power, WLAN, Mobile Broadband, Service Type and Signal Strength indicators
  • Easy and clear LED status display for connection status, connected network type, and connection errors  

CELLULAR

  • Profile managed packet data connections
  • NAT Disable for framed route configuration
  • Transparent bridge mode using PPPoE to allow the router to transparently forward Public WAN IP address to a downstream device
  • SIM Security Management (PIN configuration, enable and disable)
  • Automatic and manual cellular band selection
  • Automatic and manual operator selection  

GPS

  • Embedded GPS receiver (1575.42Mhz)
  • SMA Connector for external passive or active GPS Antenna
  • Active antenna voltage: 3.05V
  • Maximum current: 50mA
  • Tracking sensitivity under open sky: -161dBm
  • Acquisition sensitivity under open sky: -145dBm
  • Cold start sensitivity: -145dBm
  • Time to first fix (TTFF): Cold 32s, Warm 29s, Hot 1s  

WIFI/WLAN

  • High throughput and extended range 802.11n 2T2R WiFi with transmission speeds up to 300Mbps

NETWORK & ROUTING

  • Static Routing, RIP (v1/v2), Port Forwarding and DMZ
  • Dynamic DNS
  • VRRP for redundant router failover
  • DHCP Server, including :   
    • Address reservation by MAC address
    • Custom DNS server definitions
    • DHCP Relay
    • DHCP list display in Web-UI
    • Advanced DHCP Option configuration (Option 42 NTP, Option 66 TFTP, Option 150, Option 160)
  • Data Stream Manager providing ability to create mappings between input and output ports (e.g. Serial Port, SMS, GPS, USB) and perform required translation or data processing by each virtual tunnel.
  • Modbus Server TCP/IP Gateway and Client TCP/IP Agent with up to 247 slaves connected to the Serial TCP/IP Gateway.
  • Modbus RTU/ASCII frames support. 

VPN

  • PPTP Client for VPN connectivity to remote PPTP VPN Server
  • IPSec tunnel termination (for up to 5 tunnels)
  • GRE Tunnelling
  • OpenVPN (Client, Server and P2P)

ADMINISTRATION & CONFIGURATION

  • Web-based User Interface (HTTP/HTTPS) for full device status and configuration
  • Password protected configuration file backup and restore for quick device configuration and device cloning
  • Telnet Command Line Interface for status monitoring, configuration and control
  • SNMP v1/v2 including cellular specific MIB, config and firmware download
  • TR-069 Client for remote device configuration, configuration backup and restore, and firmware upgrade
  • SMS Client (Send/Receive) including inbox, outbox
  • Ping monitor watchdog (Reset connection on repeated ping failure)
  • Diagnostic Log Viewer (remote and local)
  • System Status and Security Logs
  • NTP Server Support for network time sync of device’s system clock
  • Device User Guide stored on the device and accessible via the Web-based User Interface (HTTP/HTTPS)
  • Advanced Diagnostics and Control via SMS  
    • Query status information – such as Signal Strength, WAN IP, Uptime and many more
    • Configure device remotely via SMS – such as APN, authentication settings, and many more
    • Execute commands via SMS – such as reboot, reset to defaults, go offline, and many more
    • Secure SMS management using sender whitelisting and password management
    • SMS acknowledgement replies for queries and commands

FIRMWARE MANAGEMENT

  • Firmware Upgrade locally via LAN or remotely Over-The-Air (HTTP/HTTPS, SNMP, TR-069)
  • Multiple firmware image storage on device and dynamic install
  • Triggered firmware upgrade via SMS (initiate download & install from HTTP/HTTPS)  

SOFTWARE DEVELOPMENT KIT

  • Develop and install custom software applications
  • Open Linux standard development environment
  • Develop applications/scripting in standard ANSI C/Shell script and LUA
  • Package manager built into Web-UI for Application installation/removal
  • API (C, LUA and Shell libraries) to the unit’s internal Runtime Database to allow full status monitoring configuration and control of the device from custom applications

TEMPERATURE

  • Operating Temperature Range (Class A): -30ºC to +70ºC
  • Operating Temperature Range (Class B): -40°C to +85°C (with performance deviation)

POWER SUPPLY

  • Power input and I/O via 4 way Molex mini-fit connector
  • DC Power (8 - 40V DC)
  • 1x dedicated ignition input on 4 way connector
  • Minimum power input rating of 6W via 4 way mini-fit connector. Recommended power input 12V 1.5A.
  • Vehicle compatible protection on DC Input Jack. (ISO7637 standard)
  • AC Power Supply available as optional accessory

DIMENSIONS & WEIGHT

  • Device dimensions (excluding external antenna):143mm (L) x 107mm (W) x 34mm (D) / ~235g  

MOUNTING OPTIONS

  • Wall mount support in multiple orientations via embedded mounting holes
  • DIN Rail mount support via plastic bracket included in box (Top hat section rail TH 35 IEC60715)   

CERTIFICATIONS

  • FCC, IC, PTCRB (NTC-140W-01)
  • CE, RCM (NTC-140W-02)
  • ISO7637
Specifications are subject to change without notice

Terms & Conditions:
1.      The successful buyer must complete the sale transaction (including payment) within 5 days from the date of receipt of email notification following the end of the sale. otherwise, the buyer will be consider as NON-PAY buyer.
2.         A cancellation fee of 5.5% of the total sale is applicable for any cancellations (including wrong bidding / change of mind / family or friend bidding without consent / fraud bidding). This is to cover listing fees (which are non-refundable from eBay) and also to discourage people from dummy bidding. 
3.         All auctions are final and must be paid within 5 working days of the auction ending. You will need to notify us if you cannot pay within this period. Failure to do so will result in an unpaid strike against your account.
4.        All care is taken in item listings however any misprints, omissions or mistakes are unintentional. Pictures are for illustration purposes only. 
5.         Please leave position feedback after you received your item and i will do the same.
6.         You are require to notify us any defective item within 5 days from the day you received item.  

Shipping and Handling: Please see item listing for shipping costs: 

Write a review

Write a review

Note: HTML is not translated!
    Bad           Good